This one of a series of posts on fund performance metrics. Other posts in this series include:
- LP Corner: Private Equity Fund Performance – An Overview
- LP Corner: Fund Performance Metrics – Multiples TVPI, DPI and RVPI- this blog post.
- LP Corner: Fund Performance Metrics – Internal Rate of Return (IRR) – Part One
- LP Corner: Fund Performance Metrics – Internal Rate of Return (IRR) – Part Two
- LP Corner: Fund Performance Metrics – Public Market Equivalent (PME)
- LP Corner: Fund Performance Metrics - Private Equity Fund Performance
- LP Corner: Gross vs Net Returns
In this post, we will explore using multiples as a tool to evaluate fund performance.
The multiples are:
- Distributions to Paid-in-Capital, or DPI
- Residual Value to Paid-in-Capital, or RVPI
- Total Value to Paid-in-Capital, or TVPI
Here’s some important terminology that will help explain the multiples:
- Paid-in-Capital = the capital contributed by LPs to the fund. Paid-in-capital is also known as “contributed capital” or “called capital” or sometimes “drawn capital.” Note that Paid-in-Capital is different than Committed Capital. Recall that an investment in a private equity fund occurs over time. An investor in the fund, known as a limited partner or LP, agrees (commits) to invest a certain amount in a fund, say $10 million, as and when the manager of the fund, known as a general partner or GP, needs the capital. In this case, the $10 million is the LP’s commitment. As the GP asks for a portion of this commitment (known as a “call”), the amount paid by the LP to the fund is known as Paid-in-Capital, or PIC (this is also known as “called capital”).
- Distributions = the value of the cash and stock that the fund has given back (distributed) to the LPs. Distributions are typically low early in a fund’s life, ramping up over time as investments are exited.
- Residual Value = the remaining value of the fund at a given point in time. Residual value is the value of the fund’s investments plus other fund assets (cash, etc.) less fund liabilities. So, for example, if the fund has 12 remaining investments with an aggregate estimated fair value of $100 million and another $3 million in cash, the Residual Value of the Fund is $103 million. Early in a fund’s life when investments are being made residual value is typically high (reflecting the value of the investments) and declines over time as the fund exits its investments and makes distributions to the LPs.
- Total Value = the total value of the fund, which is the sum of the distributions and the residual (remaining) value of the fund at a given point in time. The mathematical relationship among these metrics is:
To better understand the above terminology, let’s look at the terms graphically:
To read more, please click "Read More" to the right below.
Start at the top of the graphic, with the LPs. The LPs invest (contribute) cash into the fund over time. The amount contributed by LPs in the fund through a particular date is known as Paid-in-Capital. The graphic shows PIC in red as it is a cash
for LPs. (For a discussion of committed capital vs paid-in-capital, please see my blog post “LP Corner: On Committed Capital, Called Capital and Uncalled Capital.”) The fund uses the Paid-in-Capital to invest in portfolio companies, and to pay management fee and fund expenses. As the fund exits its investments (the portfolio company is sold, is recapitalized or goes public) the fund will return cash and stock to the LPs. This return of cash and stock to LPs is known as Distributions. Distributions are shown in the graphic above in green, meaning they are cash
inflows to LPs. The value remaining in the fund (primarily the value of the fund’s investments) is known as Residual Value. Residual Value is also shown in green in the above graphic, as over time this will become distributions to the LPs.
. In this discussion of multiples, we are discussing
net multiples, meaning performance net of management fee, expenses and carried interest. Stated another way, these multiples are based on returns to the LP. Please see my prior post “LP Corner: Private Equity Fund Performance – An Overview” for a discussion of gross vs net returns.
Now, on to the multiples:
DPI (Distributions to Paid-in-Capital). Distributions to Paid-in-Capital is the ratio of Distributions to Paid-in-Capital, and that value is expressed as a multiple, such as 0.5, 1.2, 2.0, etc., but also expressed as 0.5x, 1.2x, 2.0x, etc. The DPI equation is as follows:
To me, DPI is a critical evaluation tool. The higher DPI, the better. A DPI of 1.0x means that the fund has returned to LPs an amount equal to their Paid-in-Capital. A DPI of 3.0x means the fund has returned to LPs an amount equal to 3.0x their Paid-in-Capital. A 3.0x DPI for a fund is a good result.
RVPI (Residual Value to Paid-in-Capital). Residual Value to Paid-in-Capital is the ratio of Residual Value (the remaining value of the fund) to Paid-in-Capital, which is also expressed as a multiple, such as 1.0 or 1.0x. The RVPI equation is as follows:
TVPI (Total Value to Paid-in-Capital). Total Value to Paid-in-Capital is the ratio of Total Value to Paid-in-Capital, also expressed as a multiple, such as 1.0x or 2.0x. The equation is as follows:
Recall that Total Value is the sum of Distributions and Residual Value. Thus, the above equation can also be expressed as:
Pros and Cons of Using Multiples to Evaluate Fund Performance
Multiples are a common method used to evaluate the performance of a fund.
The main pros are:
- Multiples are widely used.
- Multiples are easy to calculate.
The main cons are:
- Multiples don’t take into account the time value of money. So, for example, a 2x TVPI multiple may be a good result if the fund life is 7 years, but may not be a good result if the fund life is 15 years.
- Until the fund is liquidated, multiples are indications of interim performance. The final results for a fund won’t be known until the fund is liquidated – usually after year 12, but sometimes much later, and so it is important to remember that if the fund is still active, the performance multiples are interim, not final.
- Residual value is largely based on estimates of the value of the remaining portfolio investments. If Residual Value makes up most of Total Value (meaning there haven’t been many Distributions), then estimates of portfolio company investments drive the Total Value. The problem here is that Residual Value is subject to changing valuations as the companies mature. If the fund values an investment at $10 million at a particular point in time, but the company is sold and the fund only receives $2 million, then the Residual Value was overstated by $8 million. Conversely, if that investment is sold and the fund receives $20 million, then the Residual Value was understated by $10 million. Estimating values for portfolio company investments is more art than science, and so is subject to wide variability.
Simple Example
Let’s say that as of the end a particular quarter, a fund has called $50 million of capital (PIC = $50), has distributed $60 million to LPs (D = $60), and has a residual value of $70 million (RV = $70). Total value (TV) is calculated with the following equation: TV = RV + D, so Total Value here is $130 million ($70 RV + $60 D).With this information, we can calculate the multiples:
- TVPI is 2.6x ($130 TV / $50 PIC)
- DPI is 1.2x ($60 D / $50 PIC)
- RVPI is 1.4x ($70 RV / $50 PIC). This can also be calculated by using the formula TVPI = DPI + RVPI, so solving for RVPI = TVPI – DPI, which leads to RVPI = 1.4x (2.6 TVPI – 1.2x DPI).
A couple of observations. First, if DPI is greater than one, the fund has returned to the LPs all of their paid in capital. With a DPI of 1.2x, this means that LPs have received back all of their Paid-in-Capital, and have received 20% above that. Second, the RVPI of 1.4x means that there is still a lot of value in this fund. However, we don’t know where the fund is in its fund term (is it in year 3 or 13?), and if the fund is early in its life, the RVPI may fluctuate. Finally, TVPI of 2.6 is in absolute terms a pretty good result if that’s the final number.
Detailed Example: AdVenture Capital Fund 3, L.P.
This is an early-stage venture capital fund that has committed capital of $100 million. Committed capital is the total amount of capital that LPs have agreed (committed) to provide to the fund over the life of the fund. In private equity, funds “call” capital over the life of the fund, with the bulk of the capital called during the investment term of the fund. This fund has a 10-year term, plus two 1-year extensions at the option of the general partner of the fund. The investment period for the fund is the first five years.
Here’s what the capital calls look like over the 12-year life of the fund.
Here’s what this looks like graphically:
As the chart on the left indicates, most of the capital is called during the early years of the fund’s life, when it is making new investments. The chart on the right shows the cumulative paid-in-capital over time.
Funds typically make distributions to the LPs after it has exited an investment or two. For this venture capital fund, once it makes an investment in a company, the fund will continue to hold that investment until the company is sold or goes public. This “holding period” is typically three to seven years, but can be as short as 6 months or as long as 15 years or more. This fund follows a more common path – no distributions for the first couple of years, and then a growing amount of distributions during the “harvest phase”, declining as the fund sells its remaining investments.
The annual distribution chart on the left shows that the annual distributions grow for a period of time and then decline as the fund nears the end of its term.
Residual value is the value of a fund at a given point in time. Residual value will change over time as the fund calls capital, the fund makes investments, investment valuations change, investments are exited and distributions are made to the LPs. Residual value is reported quarterly to LPs by the fund, and is called net asset value, or fund value in the financial statements.
For Adventure Capital Fund 3, L.P., the residual value at the end of each year is as follows:
Total value is the fund’s total value at a given point in time, and is the sum of distributions and residual value. Recall Total Value = Distributions + Residual Value.
Multiples
Now let’s calculate the multiples for this fund.
Let’s focus first on TVPI (aka TV/PIC).
Note that in year 1, TVPI is 0.87x. This means that the total value of the LPs investment is 87% of what the LP has paid-in as capital. So, this means the LP has a loss on its investment. Year 2 is even worse, and then it begins to rebound in year 3, and is greater than 1 in year 4. Why is this? This is known as the J-Curve, and it is explained in detail in my blog post “LP Corner: The J-Curve.”. At around year 7, the value seems to level off. This is expected as at the last stages of the fund’s life, new investments aren’t being made, and the fund is harvesting (exiting) the few remaining investments. Because the remaining investments are typically small in value compared to the overall value of the fund, the TVPI multiple doesn’t change much at the end of the fund’s life. This could change, though, if there are a few large investments that are held by the fund near the end of the fund’s life, and they either are written off (the fund suffers a large loss) or they are realized for much more than they were valued at by the fund.
Now let’s look at DPI.
As the fund goes through its life, the fund exits its investments and makes distributions to the LPs. Over time, more investments are exited and more distributions are made to the LPs. At the end of the fund’s life, all investments are exited, and the fund makes a final distribution to LPs before the fund is liquidated. At the end of the fund’s life, the DPI and TVPI will converge to the same multiple.
Finally, let’s take a look at Residual Value.
The above chart shows how residual value will fluctuate over time. Residual value is a function of investment, valuation changes and distributions. While residual value is an important metric, I don’t think this above graph adds much value.
What all this means…
A few take-aways:
- Multiples will fluctuate over the life of a fund. The multiples in early years, especially for venture capital, will likely not be indicative of the final multiples. However, multiples after year 7 or 8 are more indicative of where the fund might end up. In other words, multiples don’t mean much in the first few years of an early-stage venture capital fund’s life.
- Interim vs final results. Until a fund is wound-up and fully liquidated, the performance multiples provide interim, not final, results. As a fund ages, the multiples tend to have less variability over time, but I’ve had fund hold on to investments for many years only to be sold for pennies on the dollar (compared to the valuation the fund was holding them at) late in a fund’s life.
- Residual Value is largely an estimate. Residual value is largely based on the estimated fair values of the underlying portfolio investments. These estimates may be high or low, but are rarely exact. Because of this, it is important to understand that the higher the Residual Value or RPI, the more variability the multiples may experience over time.
- Fundraising and multiples. Most funds start fundraising for their next fund every 2-3 years. If you are trying to evaluate an existing fund’s performance based on year 3 metrics, the multiples don’t necessarily tell you the whole story. You must really dig into the exits to date and the existing portfolio to really understand the potential of the fund.
Please help me improve this post by commenting. Thanks.
© 2018 Allen J. Latta. All rights reserved.